LIFTBOY 1, 2 & 3
FIXED OR PORTABLE VERTICAL WHEELCHAIR PLATFORM LIFTS
Liftboy 1, 2, and 3 are compact vertical wheelchair platform lifts designed for small height differences. These models offer flexibility with fixed or portable configurations, making them ideal for quick installations.
can be used at
House
Business
Your are here
Technical Specifications
Lifting Height
0 – 595 mm, 0 – 830 mm, 0 – 970 mm
Weight Capacity
180 / 300 / 240 kg
Platform Width
810 / 924 mm
Platform Length
1180 / 1505 mm
Key Advantages
- Compact and space-efficient
- Quick installation
- Suitable for indoor use
- Cost-effective accessibility solution
Typical Applications
Shops and offices
Residential buildings
Institutional facilities
What Is the Liftboy 1, 2, 3 Series?
Liftboy is a series of three compact vertical wheelchair platform lifts covering small height differences up to 970mm. Unlike a fixed platform lift, Liftboy can be installed as a permanent fixture or set up as a portable unit that gets repositioned between locations, since it's light enough to move without floor mounting.
Manufactured by Lehner Lifttechnik (Austria) and supplied and installed in the UAE by Flex Access, the three models (Liftboy 1, 2, and 3) cover progressively larger height differences, so the right model is chosen to match the exact step or level change on site rather than fitting one lift to every situation.
Key Advantages
Fixed or portable
Install it permanently or move it between locations on transport wheels, without floor mounting.
Three models, one series
Liftboy 1, 2, and 3 match specific height ranges, so you specify the right size instead of overpaying for capacity you don't need.
Fast, low-disruption install
Simple commissioning and minimal structural work, suited to sites that can't tolerate long install times.
Corrosion-resistant option
Stainless steel finish available for humid or coastal UAE environments prone to corrosion.
App-based control
Operable through the Lift Control App, alongside standard remote and column controls.
Low cost of entry
The most compact and budget-conscious option in the Flex Access lift range for small level changes.
Move It When You Need To
Liftboy's low weight means it doesn't have to stay bolted to one spot. Fitted with transport wheels, it can be rolled to wherever it's needed and set up without permanent floor mounting, which fixed platform lifts can't offer.
- Low weight design for genuine portability between sites or rooms
- No permanent floor mounting required for the portable configuration
- Fixed installation also available where a permanent solution is preferred
- Rapid commissioning once the unit is in place
Liftboy 1, 2, 3 Technical Specifications
Each model is built for a different height range. Confirm the exact model against the site's measured level change before ordering.
| Specification | Liftboy 1 | Liftboy 2 | Liftboy 3 |
|---|---|---|---|
| Lifting height | 0-595 mm | 0-830 mm | 0-970 mm |
| Load capacity | 180 kg | 300 kg | 240 kg |
| Platform width | 810 mm | 924 mm | 924 mm |
| Platform length | 1,180 mm | 1,505 mm | 1,505 mm |
| Lifting speed | 10 mm/second | ||
| Power supply | Single-phase 230V, 50-60 Hz | ||
| Standard finish | RAL 7035 or RAL 9007 (all RAL colors available on request) | ||
| Installation | Fixed or portable, indoor or outdoor | ||
Configured for the Site, Not Just the Height
Beyond the three standard sizes, Liftboy can be finished and controlled to suit the specific site. A stainless steel version is available for humid or coastal environments where standard powder coating would corrode faster.
- Stainless steel finish for corrosion-prone environments
- Full RAL color range available beyond the two standard finishes
- Side access ramps and side exit configurations at the upper stop
- Control via column, remote, or the Lift Control App
- Automatic door openers where required
Key Applications
Shops and small offices
Covers a single entrance step without ramp gradients eating into limited floor space.
Residential entrances
A cost-effective fixed or portable option for homes with one or two steps at the front door.
Institutional and public facilities
Fast, low-disruption installation suits sites that need access solved without a long project timeline.
Temporary or event access
The portable configuration works where access is needed at a location for a limited time only.
Liftboy 1, 2, 3 Frequently Asked Questions
What's the difference between Liftboy 1, 2, and 3?
They cover different height ranges. Liftboy 1 handles up to 595mm at 180kg, Liftboy 2 up to 830mm at 300kg, and Liftboy 3 up to 970mm at 240kg. The right model depends on the exact level change on site.
Can Liftboy really be moved between locations?
Yes, in its portable configuration. Its low weight and optional transport wheels let it be repositioned without permanent floor mounting, unlike a fixed platform lift.
Is there a finish suited to humid or coastal sites?
Yes. A stainless steel version is available for environments where standard powder-coated finishes would corrode faster.
Can Liftboy be controlled remotely?
Yes. It supports column controls, a remote control, and app-based control through the Lift Control App.
Is Liftboy available in Abu Dhabi and Dubai?
Yes. Flex Access supplies and installs the Liftboy series across Abu Dhabi, Dubai, and the wider UAE.